DTC Troubleshooting: B1228 (06)
DTC B1228 or DTC indicator 06: A Short in the Outside Air Temperature Sensor Circuit
DTC Description
DTC
B1228 A short in the outside air temperature sensor circuit
 

1.
Problem verification:

Problem verification
?1.
Clear the DTC with the HDS.


?2.
Turn the ignition switch to LOCK (0) and then back to ON (II), or press the engine start/stop button to select the OFF mode and then the ON mode.

?3.

?4.
Check for DTCs.
DTC Description
DTC
B1228 A short in the outside air temperature sensor circuit
 

Is DTC B1228 or 06 indicated?

     
YES
     
     
     
Go to step 2.
     
NO
     
     
     
Intermittent failure. Check for loose wires or poor connections on the outside air temperature circuit.?
2.
Shorted wire check (TAM line):

Shorted wire check (TAM line)
?1.
Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.

?2.
Disconnect the following connectors.

?3.
Check for continuity between test points 1 and 2.
Test condition
IG LOCK (0) or OFF mode
Climate control unit 32P connector: disconnected
Outside air temperature sensor 2P connector: disconnected
Test circuit
TAM
Test point 1
Climate control unit 32P connector No. 27 (BRN)
Test point 2
Body ground


Is there continuity?

     
YES
     
     
     
Repair a short to body ground in the wire between the climate control unit and the outside air temperature sensor.?
     
NO
     
     
     
The TAM wire is not shorted. Go to step 3.
3.
Shorted wire check (TAM line to SENSOR COM line):

Shorted wire check (TAM line to SENSOR COM line)
?1.
Check for continuity between test points 1 and 2.
Test condition
IG LOCK (0) or OFF mode
Climate control unit 32P connector: disconnected
Outside air temperature sensor 2P connector: disconnected
Test circuit
TAM, SENSOR COM
Test point 1
Climate control unit 32P connector No. 22 (BLU)
Test point 2
Climate control unit 32P connector No. 27 (BRN)


Is there continuity?

     
YES
     
     
     
Repair a short in the wires between the climate control unit and the outside air temperature sensor.?
     
NO
     
     
     
The TAM wire and SENSOR COM wire are OK. Go to step 4.
4.
Outside air temperature sensor check:

Outside air temperature sensor check
?1.

Is the outside air temperature sensor OK?

     
YES
     
     
     
     
NO