Press the engine start/stop button to select the OFF mode and then the ON mode.
?3.
Move both power mirrors to the full up and full left positions with the power mirror switch.
?4.
Move the power seat to the full front up and full rear up positions, then slide the seat all the way back and completely recline the seat-back backward with the power seat adjustment switch.
?5.
Set the seating position into memory by pressing either the Driver 1 or the Driver 2 position memory switch.
?6.
Using the power seat switches, move the seat away from the position just memorized.
?7.
Recall the memory position with the driving position memory switch.
?8.
Wait for 2 minutes.
?9.
Check for DTCs with the HDS.
DTC Description
DTC
B1837 Memory position calling timeout
Is DTC B1837 indicated?
DTC B1837 is indicated
Go to step 2.
Any DTCs other than B1837 are indicated
Go to the indicated DTCs troubleshooting.?
NO
Intermittent failure, the system is OK at this time. Check for loose or poor connections.?
2.
Motor operation check:
Motor operation check
?1.
Clear the DTCs with the HDS.
?2.
Wait for 6 seconds.
?3.
Move each power seat motor one at a time, and check the operation time.