P0797 Pressure Control Solenoid Valve "C" Stuck ON
1.
Problem verification:
Problem verification
?1.
Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.
?2.
Clear the DTC with the HDS.
?3.
Start the engine in P.
?4.
Carry out the following operational mode of the shift lever five times:
With the brake pedal pressed, shift to N, then to D, and wait for at least 1 second. Then return to N, wait for at least 2 seconds, shift to D, and wait for at least 1 second.
?5.
Turn the engine off, and restart the engine in P. Carry out the shift lever operational mode in step -4 five times.
?6.
Check for Pending or Confirmed DTCs with the HDS.
DTC Description
Confirmed DTC
Pending DTC
Freeze Frame
P0797 Pressure Control Solenoid Valve "C" Stuck ON
Intermittent failure, the system is OK at this time.?
Repair verification (OBD STATUS check):
?1.
Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.
?2.
Clear the DTC with the HDS.
?3.
Start the engine in P.
?4.
Carry out the following operational mode of the shift lever five times:
With the brake pedal pressed, shift to N, then to D, and wait for at least 1 second. Then return to N, wait for at least 2 seconds, shift to D, and wait for at least 1 second.
?5.
Turn the engine off, and restart the engine in P. Carry out the shift lever operational mode in step -4 five times.
?6.
Monitor the OBD STATUS for P0797 in the DTCs MENU with the HDS.
DTC Description
OBD Status
P0797 Pressure Control Solenoid Valve "C" Stuck ON
Does the HDS indicate PASSED, FAILED, or NOT COMPLETED?
PASSED
Troubleshooting is complete. Check for other DTC after this troubleshooting. If any other Pending or Confirmed DTCs were indicated, go to the indicated DTC's troubleshooting.?
FAILED
Troubleshooting is incomplete. Go to step 1, and recheck.
NOT COMPLETED
Repair verification is incomplete. Meet the test condition, and check the OBD STATUS again.