|
DTC Troubleshooting: B1036
DTC B1036: IG1 Power Supply Circuit Malfunction
|
DTC Description |
DTC |
|
B1036 IG1 Power Supply Circuit Malfunction |
| |
|
|
1. |
Problem verification:
Problem verification
|
?1. |
Clear the DTCs with the HDS.
|
|
?2. |
Turn the ignition switch to LOCK (0) and then back to ON (II), or press the engine start/stop button to select the OFF mode and then the ON mode. |
|
?3. |
Wait for at least 6 seconds. |
|
?4. |
Check for DTCs with the HDS.
|
DTC Description |
DTC |
|
B1036 IG1 Power Supply Circuit Malfunction |
| |
| | |
Is DTC B1036 indicated?
|
|
|
Repair an open or high resistance in the wire between the under-dash fuse/relay box and the gauge control module.? |
|
|
|
Intermittent failure, the system is OK at this time. Check for loose or poor connections.? | |