When prompted by the HDS, select YES when asked if the vehicle has keyless access system, then press and hold the engine start/stop button for at least 2 minutes. This selects the forced ON mode.
?3.
Clear the DTCs with the HDS.
?4.
Press the engine start/stop button to select the OFF mode.
?5.
Press the engine start/stop button.
?6.
Select model on the HDS screen.
?7.
When prompted by the HDS, select YES when asked if the vehicle has keyless access system, then press and hold the engine start/stop button for at least 2 minutes. This selects the forced ON mode.
?8.
Check for DTCs with the HDS.
DTC Description
DTC
B12E5 Incorrect assembly of control unit for electric steering lock equipped vehicle
Is DTC B12E5 indicated?
YES
Incorrect assembly of control unit for electric steering lock equipped vehicle. Replace it with the correct keyless access control unit.
NO
Intermittent failure, the system is OK at this time. Check for loose or poor connections.?