DTC Troubleshooting: P0069 (L4) - Honda Accord CR/CT 2012-2017

DTC Troubleshooting: P0069

DTC P0069: BARO Sensor Circuit Range/Performance Problem

NOTE: Before you troubleshoot, review the general troubleshooting information.

DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
P0069 BARO Sensor Circuit Range/Performance Problem

Problem verification:

Problem verification

?1.	Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

?2.	Clear the DTC with the HDS.

?3.	Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.

?4.	Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

?5.

Check for Pending or Confirmed DTCs with the HDS.

DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
P0069 BARO Sensor Circuit Range/Performance Problem

Is DTC P0069 indicated?


	YES

The failure is duplicated. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting or substitute a known-good PCM.?


	NO

Intermittent failure, the system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.?