|
Auto High-Beam (High-Beam Support System) C-MOS Camera Light Source Test
Cautions for the test environment
|
|
The C-MOS camera must be fixed. |
|
|
There should be no bright objects at the back of the target vehicle (sunlight, windows, illumination, or reflectors). |
|
|
The confirm should be done in a dark area (15 lux or less). |
Set up the vehicle
|
|
All wheels of the vehicle should touch the ground. |
|
|
Make sure the steering wheel is straight ahead, and do not turn it after setting up the vehicle. |
|
|
Make sure that all doors are closed. |
|
|
Do not put any objects on the instrument panel. |
|
|
Before testing, clean the lens of the C-MOS camera with dry cloth, and the interior and exterior surface of the windshield of the lens parts. |
|
|
Shift to the neutral position, and apply the parking brake. |
|
|
The vehicle is arranged so that headlights and taillights may expose the C-MOS camera. |
Confirm C-MOS camera
|
1. |
Setting the distance between the target vehicle (A) and customer's vehicle (B). |
|
2. |
Connect the HDS to the data link connector (DLC). |
|
3. |
Press the engine start/stop button to select the ON mode. |
|
4. |
From the BODY ELECTRICAL SYSTEM SELECT menu, select AUTO HIGH-BEAM, then FUNCTIONAL TESTS. |
|
5. |
Do the test in this order:
|
|
ONCOMING VEHICLE DETECTION |
|
|
PRECEDING VEHICLE DETECTION | |
| 