When the ignition switch is turned ON (II), the A/T gear position indicator displays an improper indication, or it never displays at all (CVT)

When the ignition switch is turned ON (II), the A/T gear position indicator displays an improper indication, or it never displays at all

Probable cause(s)

	F-CAN communication line error
	Gauge control module defective
	PCM defective

Notes

	Check the F-CAN communication line.
	Check the F-CAN communication line by using the gauge control module self-diagnostic function.
	Check the indicator drive circuit in the gauge control module by using the gauge control module self-diagnostic function.