Stall speed low
Probable cause(s)
PCM defective
Engine output low
Transmission fluid feed pipe worn, damaged, or out of round
Main valve body defective
Secondary valve body defective
Linear solenoid valve body defective
Clutch reducing valve body defective
Stator shaft worn or damaged
Torque converter assembly defective
Torque converter ring gear worn or damaged
Transmission assembly and drive plate installation defective
Notes
Check for a stored DTC, and check for loose connectors.
Check the transmission fluid feed pipe for wear, damage, and out of round.
Check the main valve body for wear and damage.
Check the secondary valve body for wear and damage.
Check the linear solenoid valve body for wear and damage.
Check the clutch reducing valve body for wear and damage.
Check the stator shaft for wear and damage.
Inspect the torque converter assembly for wear and damage. If the torque converter assembly is worn or damaged, replace it as an assembly.