Set speed does not cancel (engine rpm stays high) when the clutch pedal is pressed for more than 5 seconds (M/T) (Cruise Control)

Set speed does not cancel (engine rpm stays high) when the clutch pedal is pressed for more than 5 seconds (M/T)

Diagnostic procedure

1.	Do the clutch pedal position switch B test.
2.	Do the cruise control input test. Test the clutch pedal position switch B signal input.
3.	Check the PGM-FI system.

Also check for

	Short to ground in the BLU and BLK wire
	Faulty clutch pedal position switch B