The framework of the front body is composed of the bulkhead, front side frame, wheelhouse and damper housing. In order to evaluate the damage correctly, it is important to check not only for the deformation and cracks of the component parts but also to check thoroughly for the deformation of the dashboard and the front pillar.

Reliance on visual checks alone will overlook some serious damage. Therefore, it is strongly recommended to measure the body using an appropriate gauge. In particular, it is vital to use a gauge to measure the damper housing and side frame positions because both of them greatly influence wheel alignment. The gauge must be used based on the datum point placed on a non-damaged part.

It is possible to check the damage with the outer panel assembled, but pay attention to the following points: