|
Repairing Major Body Damage - Anti-Rust Treatment (After Painting)
| 1. |
Internal Anti-rust Treatment |
|
|
Internal Anti-rust Treatment:
|
|
|
|
During collision repairs, body pulling and welding destroy the e-coat film on inner panels.
This will quickly allow rust to form on those panels. Thoroughly apply anti-rust agent on inner surfaces in the repaired areas prevent corrosion. | |
|
|
|
Always apply anti-rust agents a little beyond the actual repair areas. | |
|
|
|
For the basic locations of anti-rust agent application, refer to the model specific body repair manual: |
|
|
|
? |
Apply internal anti-rust agent through part installation holes, inner panel openings, grommet installation holes, etc. Apply anti-rust agent liberally until it bleeds through the panel mating seams.
|
|
|
|
? |
When applying anti-rust agent to a wide area, use spray equipment specifically designed for anti-rust agent application and the most appropriate nozzle (360 degree nozzle, L nozzle, etc.). | | | | | 
