|
Aluminum Alloy Body Repair - Repairing a Crack
|
|
If any cracks are discovered during inspection, be sure to repair them. |
|
Sand down the bead twice the length of the crack and correctly re-weld.
| |
|
|
|
|
|
Drill about 2 mm (0.079 in) holes at both ends of the crack to stop further progression. | | |
|
|
|
|
Weld the crack thoroughly.
|
If a crack appears during the pulling, be sure to replace that part with a new one. Do not weld it. | | | 
