Used to pull out damaged panels by attaching metal washers or studs.

Allows working the panel from the outside when the back side of the damage is not accessible.

Drawing work is possible with the use of carbon electrode.

Leveling Hammer
Used with a dolly and spoon for panel reforming.

Pick Hammer
Used with a dolly and spoon for panel reforming.

Rough Pulling out Hammer
Used with a body/frame correction machine and/or a porto-power for rough repairs. Also can be used to remove outer panels.

Wooden Hammer
Used for reforming steel using a drawing process or for reforming a steel panel without elongating it.

Used with a hammer to reform panels.

Choose the most appropriate one according to the shape of the panel.

Used where a dolly cannot be used because of a space limitations.

Very durable because of it’s special material construction.

Select the most appropriate one according to the shape of the panel.

Used to pull-out panels with minor damage.

Used for a wide range of applications by the combination of attachments and slide hammers.