Chemical paint stripper is sometimes used when removing old paint film layers.
Chlorinated hydrocarbons are the main component, which is adjusted by a thickener to allow brush coating. A small amount of paraffin is also found in paint stripper. Always rinse surfaces thoroughly with water after removing.

Used for urethane bumpers because of its high flexibility and improved adhesion.

A high performance, rust proof and electrically conductive primer applied to the areas where spot or MAG plug welding is being done. It is water-based and allows spot welding after coating.

Special primer applied to the lower or bottom part of vehicles to protect parts from chipping damage cause by stones kicked up from the road surface. It has a better appearance than undercoating and general film thickness is 100?200 ?m (0.004?0.008 in). Its color is gray and chipping resistance (impact resistance, adhesiveness, elasticity) is high.

Remove contaminants such as wax and silicone from surfaces being prepared for paint.