Uses refrigeration equipment and heat exchangers to reduce the temperature of the hot air discharged the compressor.

By reducing the compressed air’s temperature significantly below ambient, the moisture it contains is condensed and removed.

The air separator removes moisture, oil and dirt from the compressed air by applying the cyclone motion of the built-in deflector.

The air filter is installed between the air dryer and air pressure regulator. It is designed to remove even the very small droplets or mist of contaminants from the cooled compressed air.

Air pressure regulators are adjustable to drop the shop air pressure to a working pressure for spray gun or other air tool use.

The built-in air filer can remove water, oil and dirt from compressed air.

Regulators are positioned at end of an air pipe. An air hose generally connects directly to the regulator

Check and drain the regulator daily.