Paint Repair - Primer-Surfacer Application on New Parts
1. Primer-Surfacer Application on New Parts
If you are replacing hood and door panels with brand new parts
1.
Dry sand the panel with a double action sander and P320 sandpaper. Manually sand using a sandpaper or a scuffing pad where the sander cannot access.
2.
Degrease and clean after air blowing away any debris.
3.
Spray the primer-surfacer (mist coat to form a thin layer) over the whole panel and inspect for any lifting or other defects.
4.
Allow sufficient flash time.
5.
Applying primer-surfacer to the entire surface, making sure the texture and appearance are even.