Maintenance Minder™ General Information
Maintenance Minder
The Maintenance Minder is an important feature of the multi-information display. Based on engine and transmission operating conditions, and accumulated engine revolutions, the Civic's onboard computer (PCM) calculates the remaining engine oil and the transmission fluid life. The system also displays the remaining engine oil life along with the code(s) for other scheduled maintenance items needing service.
Gauges:
Steering Wheel:
Service Information
1.
The remaining engine oil life is shown as a percentage on the multi-information display. To see the current engine oil life, turn the vehicle to the ON mode, then press the INFORMATION switch repeatedly until "Maintenance Minder (A)" appears on the multi-information display. Press the Source/Enter button to show the current engine oil life (B) on the display.
2.
When the vehicle is in the ON mode, and the remaining engine oil life is 15 % to 6 %, the remaining engine oil life and other scheduled maintenance item(s) needing service are displayed.
The Maintenance Minder message "Maintenance Due Soon" (A) also comes on. To cancel the message, press the INFORMATION switch or Audio Remote/Multi-Information Display Switch. The display continues to show the remaining engine oil life (B) and the message indicator (C) until it is reset.


3.
When the vehicle is in the ON mode, and the remaining engine oil life is 5 % to 1 %, the Maintenance Minder message "Maintenance Due Now" (A) is displayed along with the same maintenance item code(s).
4.
When the vehicle is in the ON mode, and the remaining engine oil life is 0 %, the Maintenance Minder message "Maintenance Past Due" is displayed along with the same maintenance item code(s).
5.
If the indicated maintenance is not done, the Maintenance Minder shows a negative distance traveled (A), for example ‘‘-10 miles,’’ on the display. If the negative distance traveled is between 0 and 9, the message is displayed for only a few seconds when turning the vehicle to the ON mode. The negative distance traveled remains displayed after the vehicle is driven more than 10 miles (for USA models) or 10 km (for Canada models) after 0 % oil life is reached, and the display cannot be canceled. This means the indicated maintenance item(s) should have been done more than 10 miles (or 10 km) ago.
Resetting the Maintenance Minder
NOTE:
The vehicle must be stopped to reset the Maintenance Minder.
If a required service is done and the Maintenance Minder is not reset, or if the Maintenance Minder is reset without doing the service, the system will not show the proper maintenance timing. This can lead to serious mechanical problems because there will be no accurate record of when the required maintenance is needed.
You can reset all maintenance items by batch, or you can select and reset each maintenance item individually on the display.
The engine oil life and maintenance item(s) can be independently reset with the HDS.

1.
Turn the vehicle to the ON mode.

2.
If system message(s) are displayed, press the INFORMATION switch or Audio Remote/Multi-Information Display Switch to cancel the display until the "Maintenance Minder" icon is displayed, then press the Source/Enter button.

3.
Display shows the remaining engine oil life, and then press and hold the Source/Enter button for 10 seconds or more. The "Maintenance Reset" mode appears on the multi-information display.

NOTE:
If you are resetting the Maintenance Minder when the engine oil life is more than 15 %, make sure any maintenance item(s) requiring service are done before resetting the display.
To cancel the "Maintenance Reset" mode, press the Audio Remote/Multi-Information Display Switch to select the "Cancel," then press the Source/Enter button.

4.
If you reset all the maintenance items shown on the display "A23 (for example)", select "All Due Items" by pressing the Audio Remote/Multi-Information Display Switch and press the Source/Enter button. If you reset each maintenance item individually, select an item (complete list of maintenance main item(s) and sub item(s)) you wish to reset by pressing the Audio Remote/Multi-Information Display Switch and press the Source/Enter button.
5.
The maintenance item code(s) will disappear, and the engine oil life will reset to "100 %."
Resetting Individual Maintenance Items by HDS
1.

2.
Turn the vehicle to the ON mode.

3.
Make sure the HDS communicates with the vehicle and the powertrain control module (PCM). If it doesn't communicate, troubleshoot the DLC circuit.

4.
Select GAUGES in the BODY ELECTRICAL with the HDS.

5.
Select ADJUSTMENT in the GAUGES with the HDS.

6.
Select MAINTENANCE INFORMATION in the ADJUSTMENT with the HDS.

7.
Select MAINTENANCE MINDER in the MAINTENANCE INFORMATION with the HDS.

8.
Select the individual maintenance item you wish to reset with the HDS.