The welding symbols in the removal/installation have these meanings. The welding symbols with dashed lines have a meaning of the spot welding of the part which is not visible.
NOTE: To maintain the original body strength and collision safety performance, carefully follow published welding methods. Do not substitute.
and : 2-Plate spot welding
and : 3-Plate spot welding
and : 4-Plate spot welding
: MAG plug welding
: MAG welding (butt or fillet)
: Double Hole MIG brazing (1500 MPa to HSS/UHSS)
: Single Hole MIG brazing (270 MPa to 1500 MPa)
L and L*= Welding length; unit: mm (in)
( ) and ( )*: The number of welds
Body Dimensional Drawings
Body measuring dimensions show the distance between the forward or upper edge of positioning bosses and/or holes shown in the detail illustration.
However, the measuring points in the frame repair chart are always the centers of the holes.
Rust Prevention
The following type of illustration shows the areas where sealant is to be applied.
