CVT Differential Carrier Disassembly and Reassembly
Special Tools Required
Image Description/Tool Number
310224.png Installer Attachment 40 mm 07LAD-PW50601

NOTE:
enu_12713377_2.0 Where icon is shown, click for further information.
The carrier bearing and the carrier bearing outer race should be replaced as a set.


1


179_3.0_enu_16153454_3.0

enu_12713377_2.0
Detailed information, notes and precautions
enu_12714524_1.0
Replace
*1
Left-hand threads

1. Final Driven Gear - Remove


2. Differential Carrier Tapered Roller Bearing - Remove
1.
Set a commercially available bearing puller (A) under the carrier bearings (B) as shown.
2.
Remove the carrier bearings using the commercially available bearing puller and a commercially available spacer (C).


NOTE:
enu_12713377_2.0 Where icon is shown, click for further information.
The carrier bearing and the carrier bearing outer race should be replaced as a set.
Adjust the carrier bearing preload after replacing the carrier bearing and the carrier bearing outer race.
Apply a light coat of clean transmission fluid on all parts before installation.


1


179_3.0_enu_16153455_3.0

enu_12713377_2.0
Detailed information, notes and precautions
enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)
enu_12714524_1.0
Replace
*1
Left-hand threads

1. Differential Carrier Tapered Roller Bearing - Install
1.
Install the carrier bearings (A) until it bottoms using the 40 mm installer attachment and a press.

2. Final Driven Gear - Install

NOTE: Tighten the final driven gear bolts to the specified torque in a crisscross pattern in at least two steps.