Combination Light Switch Removal, Installation, and Test
SRS components are located in this area. Review the
SRS component locations
and the
precautions and procedures
before doing repairs or service.
1.
Column Covers - Remove
2.
Combination Light Switch - Remove
1.
Disconnect the connector (A).
2.
Remove the combination light switch (B) by pressing the tabs.
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
1.
Combination Light Switch - Test
1.
Check for continuity between the terminals in each switch position according to the tables.
2.
If the continuity is not as specified, replace the combination light switch (A).
