Brake Pedal Position Switch Removal and Installation
1. Brake Pedal Position Switch - Remove
Do not connect the brake pedal position switch connector with the brake pedal position switch removed.
The engine may start if the start/stop button is pressed as the system interprets that the brake pedal is depressed.
Unintended starting of the engine is dangerous.
1.
Disconnect the connector (A).
2.
Turn the brake pedal position switch (B) counterclockwise to remove the switch from the pedal bracket (C).
3.
Remove the attaching piece (D).

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.