Horn Removal, Installation, and Test
1.
Front Bumper - Remove
2.
Horn - Remove
1.
Disconnect the connector(s) (A).
2.
Remove the harness clip (B)
3.
Remove the horn (Low) (C).
4.
With double horn: Remove the horn (High) (D).
3.
All Parts Removed - Install
1.
Install the parts in the reverse order of removal.
1.
Horn - Test
1.
Test the horn by momentarily connecting 12 volt battery power to the terminal No. 1, and 12 volt battery ground is connecting to terminal No. 2. The horn should sound.
2.
If it fails to sound, replace the horn.
