Moonroof Switch Removal, Installation, and Test
1. Front Individual Map Light - Remove
1.
Turn the front individual map light switch OFF.
2.
Carefully pry off the lenses (A).
3.
Remove the front individual map light (B).
4.
Disconnect the connectors (C).

2. Moonroof Switch - Remove

3. Moonroof Switch Bulb - Remove
1.
Remove the switch cover (A).
2.
Turn the bulb (B) counterclockwise to remove it.

4. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

1. Moonroof Switch - Test
NOTE: When doing the moonroof switch (A) test, install the bulb correctly.
1.
Check for continuity between the terminals in each switch position according to the table.
2.
If the continuity is not as specified, replace the bulb or moonroof switch.