Washer Fluid Level Switch Removal, Installation, and Test
1.
Front Inner Fender - Remove
1.
2.0 L:
Remove the right front inner fender as needed
.
2.
1.5 L:
Remove the left front inner fender as needed
.
2.
Washer Fluid Level Switch - Remove
1.
Disconnect the connector (A).
2.
Remove the washer fluid level switch (B).
NOTE: Fluid may flow out of the opening.
3.
Remove the grommet (C).
NOTE: Inspect the grommet for damage. If damaged, replace it.
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
1.
Washer Fluid Level Switch - Test
1.
Check the washer fluid level switch (A) according to the table.
2.
If the continuity is not as specified, replace the washer fluid level switch.
