Remove the flange nut (A) while holding the respective joint pin (B) with a hex wrench (C).
2.
Remove the stabilizer link lower mounting bolt (D).
1.
Stabilizer Link - Install
1.
Install the stabilizer link (A).
2.
Install the new flange nut (B), and tighten it to the specified torque while holding the respective joint pin (C) with a hex wrench (D).
3.
Install the stabilizer link lower mounting bolt (E).
NOTE: Loosely install the nuts and/or bolts to install the bushings, load the suspension with the vehicle’s weight, and then tighten the nuts and/or bolts to the specified torque.
