Brake Pedal Removal and Installation

NOTE: Unless otherwise indicated, illustrations used in the procedure are for CVT.

1. Brake Pedal - Remove
1.
Remove the brake pedal support member (A).
2.
Disconnect the connector (B).
3.
Remove the clips (C).
4.
Remove the lock pin (D).
5.
Remove the clevis pin (E).
NOTE: During installation, apply multipurpose grease to the clevis pin in the brake pedal.
6.
Remove the brake pedal with bracket (F).
7.
Remove the brake pedal position switch (G) by turning it 45 ° counterclockwise.

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.