Automatic Brake Hold Switch Removal, Installation, and Test
1.
Center Console Shift Panel - Remove
2.
Automatic Brake Hold Switch - Remove
1.
Remove the electric parking brake/automatic brake hold switch (A).
2.
Remove the automatic brake hold switch (A).
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
1.
Automatic Brake Hold Switch - Test
1.
On the switch side, measure the resistance between the automatic brake hold switch 4P connector terminals No. 1 and No. 2 according to the table.
2.
If there is no resistance in one or more positions, replace the switch.
Position
Resistance
PRESSED
About 559 ?
RELEASED
About 2200 ?
