Front Passenger's Airbag Cutoff Indicator Removal and Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.


NOTE: Wait at least 3 minutes before starting work.

3. Front Passenger's Airbag Cutoff Indicator - Remove
1.
Remove the front passenger's airbag cutoff indicator (A).

4. All Removed Parts - Install
1.
Install all of the removed parts in reverse order.

5. SRS Operation - Confirm
1.
Do the 12 volt battery terminal reconnection procedure, turn the vehicle to the ON mode, and check that the SRS indicator comes on for about 6 seconds and then goes off.