Injector Removal and Installation

Flammable - Keep Fire Away

NOTE: Refer to the Fuel and Emissions Systems Service Precautions before disconnecting the fuel line.


1

2014_4.0_enu_14143367_5.0

enu_12714524_1.0
Replace

2. Connector (Injector) - Disconnect


3. Quick-Connector Fitting Cover - Remove


5. Fuel Rail and Injector - Remove


6. Injector - Remove



Flammable - Keep Fire Away

NOTE:
enu_12713377_2.0 Where icon is shown, click for further information.
Refer to the Fuel and Emissions Systems Service Precautions before disconnecting the fuel line.


1

2014_4.0_enu_14148670_5.0

enu_12713377_2.0
Detailed information, notes and precautions
enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)
enu_12714524_1.0
Replace
*1
Coat the clean engine oil
*2
O-rings (black)
*3
O-rings (brown)

1. Injector - Install


2. Fuel Rail and Injector - Install

NOTE: Carefully install the fuel rail and the injectors to the cylinder head.

4. Quick-Connector Fitting Cover - Install


5. Connector (Injector) - Connect


6. Fuel Leak - Check
1.
Turn the vehicle to the ON mode, but do not start the engine. After the fuel pump runs for about 2 seconds, the fuel line will be pressurized. Repeat this two or three times, then check for fuel leakage.