Camshaft Timing Inspection
4. Camshaft Timing - Inspect
1.
Turn the crankshaft to align No. 1 position at top dead center (TDC); the white mark (A) on the crankshaft pulley lines up with the pointer (B) on the cam chain case.
2.
With the No. 1 piston at top dead center (TDC), check the "UP" mark (A) on VTC actuator A should be at the top.
3.
Check the TDC marks (B) on VTC actuator A and VTC actuator B, the marks should align. If the marks are not aligned, remove the cam chain and reinstall the cam chain properly.

5. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.