Side Engine Mount Removal and Installation
1.
Engine Undercover Plate - Remove
2.
Engine - Support
1.
Lift and support the engine with a jack and a wood block under the oil pan.
3.
Expansion Tank - Move
NOTE: Do not disconnect the water bypass hoses.
4.
Side Engine Mount - Remove
1.
Remove the ground cable (A).
2.
Remove the side engine mount bracket (B).
3.
Remove the side engine mount (C).
5.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE:
Do the mounts tightening procedure before tightening all of the mounts' bolts and nuts.
