Engine Oil Jet Inspection
2. Oil Jet - Inspection
1.
Inspect it as follows.
Make sure that a 1.0 mm (3/64 in) diameter drill bit will go through the nozzle hole (A) (1.2 mm (0.047 in) diameter).
Make sure that a 1.0 mm (3/64 in) diameter drill bit will go through the oil intake (B) (1.2 mm (0.047 in) diameter).
Insert a 1.0 mm (3/64 in) drill bit into the oil intake (1.2 mm (0.047 in) diameter). Make sure the check ball (C) moves smoothly.

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.