Engine Oil Pump Chain Removal and Installation
Special Tools Required
Image Description/Tool Number
310190.png Universal Lifting Eyelet 07AAK-SNAA120
2279882.png Engine Support Hanger, A and Reds AAR-T1256*
*: Available through the Honda Tool and Equipment Program 888-424-6857.
1. Alternator Mounting Bolt - Remove

3. Engine Support Hanger and Universal Lifting Eyelet - Install

NOTE:
Be careful when working around the windshield.
Be careful not to damage the hood opener cable when installing the engine support hanger at the front bulkhead.
1.
Remove the front damper caps.
2.
Attach the universal lifting eyelet to the alternator.
3.
Install the engine support hanger onto the vehicle as shown.
4.
Attach the hook to the slotted hole in the universal lifting eyelet.
5.
Tighten the wing nut (A) by hand, and lift and support the engine/transmission.

5. Oil Pump Chain - Remove


NOTE: These marks (A) shall be used in product process only and not used for maintenance purpose. There is no need to line up the marks as it has no effect on the engine operation.


1. Oil Pump Chain - Install
1.
Install the oil pump chain (A).

3. Engine - Support
1.
Lift and support the engine with a jack and a wood block under the oil pan.

4. Engine Support Hanger and Universal Lifting Eyelet - Remove


6. Alternator Mounting Bolt - Install