Intake Air Resonator Removal and Installation
Special Tools Required
Image Description/Tool Number
310292.png Subframe Adapter VSB02C000016*
*: Available through the Honda Tool and Equipment Program 888-424-6857.

NOTE: Hold the steering wheel with the steering wheel holder tool.

11. Torque Rod Mounting Bolt - Remove

13. Lower Arm Mounting Bolt - Remove

14. Front Subframe - Support
1.
Set the subframe adapter (VSB02C000016) on a transmission jack (A), line up the slots in the arms with the bolt holes on the corner of the jack base, and tighten the bolts.
2.
Attach the subframe adapter to the front subframe (B).

16. Intake Air Resonator Mounting Bolt - Remove


17. Intake Air Resonator - Remove

1. Intake Air Resonator - Install
NOTE: Make sure there are rubber seals (A) at the air cleaner before installing the resonator. If the rubber seals is off, it must be reinstalled.


2. Intake Air Resonator Mounting Bolt - Install


3. Front Subframe - Support
1.
Set the subframe adapter (VSB02C000016) on a transmission jack (A), line up the slots in the arms with the bolt holes on the corner of the jack base, and tighten the bolts.
2.
Attach the subframe adapter to the front subframe (B).

5. Lower Arm Mounting Bolt - Install

6. Torque Rod Mounting Bolt - Loosely Install