Shift Solenoid Valve O/P Removal and Installation (L15B7/L15BA/L15BY (CVT))

Shift Solenoid Valve O/P Removal and Installation

NOTE: Keep all foreign particles out of the transmission.

1.	Vehicle - Lift

2.	Engine Undercover Plate - Remove

3.	Engine - Warm Up

Start the engine, and warm it up to normal operating temperature (the radiator fan comes on twice).

Turn the engine off.

4.	Transmission Fluid - Drain

5.	Transmission Fluid Pan - Remove

NOTE: The actual transmission fluid (HCF-2) capacity will vary from the specified capacity based on the length of time the transmission fluid pan is off the transmission. Avoid leaving the transmission fluid pan off for extend periods of time.

6.	Shift Solenoid Valve O/P - Remove

Disconnect the connector (A).

Remove the shift solenoid valve O/P (B).

7.	All Removed Parts - Install

Install the parts in the reverse order of removal.

8.	Transmission Fluid - Refill

9.	Transmission Fluid Level - Check