To prevent damage, cover the connector (A) located under the CVTF warmer (B) using a shop towel.
2.
Disconnect the CVTF warmer inlet hose (C) and outlet hose (D).
NOTE: When disconnecting/connecting the hoses, do not bend the warmer pipes excessively, or they will be damaged or deformed.
1.
CVTF Warmer Hose - Connect
1.
Connect the CVTF warmer inlet hose (A) and outlet hose (B) to each bulge (C) of the CVTF warmer lines by aligning the paint marks (D) on the lines with the paint marks (E) on the hose ends.
NOTE: When disconnecting/connecting the hoses, do not bend the warmer pipes excessively, or they will be damaged or deformed.
2.
Secure the CVTF warmer hoses with the clamps (F).
NOTE:
When securing the clamps, make sure they do not interfere with the surrounding parts.
Check the connector (G) for corrosion, dirt, or oil, and clean or repair if necessary.
