Measure the clearance between the reverse shift lever (A) and the reverse shift fork (B) with a feeler gauge (C). If the clearance exceeds the service limit, go to step 2.
Standard:
0.40?0.85 mm (0.016?0.033 in)
Service Limit:
0.85 mm (0.033 in)
2.
Measure the width of the reverse shift lever.
If the width is not within the standard, replace the reverse shift lever.
If the width is within the standard, replace the reverse shift fork.
Standard:
6.75?7.00 mm (0.2657 ?0.2756 in)
3.
Measure the clearance between the reverse shift lever (A) and the reverse shift piece (B) with a feeler gauge (C). If the clearance exceeds the service limit, go to step 4.
Standard:
0?0.4 mm (0?0.01 in)
Service Limit:
0.4 mm (0.01 in)
4.
Measure the width of the reverse shift lever.
If the width is not within the standard, replace the reverse shift lever.
If the width is within the standard, replace the reverse shift piece.
