M/T Differential Carrier and Final Driven Gear Removal and Installation (Except Type-R/Si (M/T))

M/T Differential Carrier and Final Driven Gear Removal and Installation

1.	Differential Carrier Bearing - Remove

2.	Final Driven Gear - Remove

Loosen the bolts in a crisscross pattern in several steps, then remove the bolts and the final driven gear (A).

3.	All Removed Parts - Install

Install the parts in the reverse order of removal.

NOTE:

Tighten the bolts in a crisscross pattern in several steps.

Make sure the final driven gear is installed in the correct direction.