Center Console Removal and Installation
NOTE: SRS components are located in this area. Review the
SRS component locations
and the
precautions and procedures
before doing repairs or service.
1.
Center Console Rear Trim - Remove (With Keyless Access System)
2.
Center Console Lower Tray - Remove
3.
Center Console - Remove
1.
Remove the harness clips (A) at the shift panel area.
2.
For some models: Remove the mat (A).
3.
Remove bolts (B).
4.
With keyless access system: Disconnect the connector (A).
5.
With keyless access system: Remove the harness clip (B).
6.
Remove the center console (A).
7.
With USB port B: Disconnect the connector (B).
4.
Center Console Support Bracket - Remove (M/T)
5.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
