Interior Trim Removal and Installation - Rear Shelf Area
NOTE:
SRS components are located in this area. Review the
SRS component locations
and the
precautions and procedures
before doing repairs or service.
If side airbags and/or side curtain airbags have deployed, the affected pillar area trim and attachment clips must be replaced. Refer to
Component Replacement/Inspection After Deployment
.
1.
C-Pillar Lower Trim - Remove
2.
Rear Shelf Trim - Remove
1.
Fold down the rear seat-back.
2.
From the trunk lid opening, disconnect the connector (A).
3.
With rear tweeter: From the trunk lid opening, disconnect the connectors (B).
4.
Remove the rear shelf trim (C).
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
