Put a shop towel in the opening between the bottom edge of the mirror holder (A) and the mirror housing (B) to prevent scratches.
3.
Insert a flat-tip screwdriver under the mirror holder, and release the hooks (C).
4.
Remove the mirror holder (A).
5.
Disconnect the connectors (B).
2.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: Before reinstalling the mirror holder to the inner holder (A) of the actuator, make sure the actuator rods (B) are securely mounted in the holes, and that the boots (C) properly cover each rod.
