Moonroof Glass Position Adjustment
1. Moonroof Glass Position - Check
The roof panel (A) should be even with the glass roof seal (B) to within 0?1/?1 mm (0?0.04/?0.04 in) all the way around. If not, make the following adjustment:


2. Moonroof Glass Position - Adjust
1.
Slightly loosen the bolts (A) with a TORX T25 bit.
2.
Move the glass (B) up or down.
3.
Tighten all bolts securely.
4.
If necessary, repeat on the opposite side.