Carefully pry off the trunk light (A) to the side to release the hook and pull out the light.
2.
Disconnect the connector (B).
3.
Remove the bulb (C) from the trunk light.
2.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
1.
Trunk Light - Test
NOTE: When doing the trunk light test, make sure to install the bulb correctly.
1.
Check the light according to the table.
NOTE: Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).
2.
If the result is not as specified, replace the bulb or trunk light (A).
