Trunk Lid Release Actuator Test
1.
Trunk Lid Trim Panel - Remove
(With Trunk Lid Trim Panel)
2.
Trunk Lid Release Actuator - Test
NOTE: Illustrations used in the procedure are for 4-door.
1.
Disconnect the connector (A).
2.
Check the actuator operation by connecting power and ground according to the table.
NOTE: To prevent damage to the actuator, apply battery voltage only momentarily.
3.
If the actuator does not actuate, the trunk lid release actuator is faulty;
replace the trunk lid latch
(B).
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
