Trunk Lid Opener Switch Test

1.	Driver's Door Panel - Remove

2.	Trunk Lid Opener Switch - Test

NOTE: Illustrations used in the procedure are for 4-door.

Check the trunk lid opener switch (A) according to the table.

NOTE:

When an LED is located between terminals, check if the LED illuminates by connecting power and ground to the LED.

Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).

If the result is not as specified, replace the trunk lid opener switch.

3.	All Removed Parts - Install

Install the parts in the reverse order of removal.