Trunk Lid Latch Switch Test
1.
Trunk Lid Trim Panel - Remove
(With Trunk Lid Trim Panel)
2.
Trunk Lid Latch Switch - Test
NOTE: Illustrations used in the procedure are for 4-door.
1.
Disconnect the connector (A).
2.
Check for continuity between the terminals in each switch position according to the table.
3.
If the continuity is not as specified, the trunk lid latch switch is faulty;
replace the trunk lid latch
(B).
3.
All Parts Removed - Install
1.
Install the parts in the reverse order of removal.
