Exterior Lights Bulb Removal and Installation
Headlight (High Beam) (Without LED Headlight)

1. Headlight (High Beam) Bulb - Remove
1.
Disconnect the connector (A).
2.
Turn the bulb (B) counterclockwise to remove it from the housing.
3.
Remove the rubber cover (C).
NOTE: Inspect the rubber cover for damage. If damaged, replace it.

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Headlight (Low Beam) (Without LED Headlight)

1. Headlight (Low Beam) Bulb - Remove
1.
Disconnect the connector (A).
2.
Turn the bulb (B) counterclockwise to remove it from the housing.
3.
Remove the rubber cover (C).
NOTE: Inspect the rubber cover for damage. If damaged, replace it.

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Front Turn Signal Light (Without LED Headlight)

1. Front Turn Signal Light Bulb - Remove
1.
Turn the front wheel inward on the headlight side being removed.
2.
Pull back the front inner fender (A) as needed to access the bulb (B).
3.
Disconnect the connector (C).
4.
Turn the bulb socket (D) counterclockwise to remove the bulb.

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Brake Light

2. Brake Light Bulb - Remove
1.
Turn the bulb socket (A) counterclockwise to remove the bulb (B).

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Back-Up Light

2. Back-Up Light Bulb - Remove
1.
Turn the bulb socket (A) counterclockwise to remove the bulb (B).

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Rear Turn Signal Light

2. Rear Turn Signal Light Bulb - Remove
1.
Turn the bulb socket (A) counterclockwise to remove the bulb (B).

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Fog Light (With Fog Light)

1. Fog Light Bulb - Remove
1.
Pull back the front inner fender (A) as needed to access the bulb (B).
2.
Disconnect the connector (C).
3.
Turn the bulb counterclockwise from the housing.

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Front Side Marker Light

2. Front Side Marker Light Bulb- Remove
1.
Turn the bulb socket (A) counterclockwise (clockwise*) to remove the bulb (B).
*: Right side marker light.

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.