Carefully pry off the sides of the cargo area light (A) to release the hook and pull out the light.
2.
Disconnect the connector (B).
3.
Remove the bulb (C) from the cargo area light.
2.
All Parts Removed - Install
1.
Install the parts in the reverse order of removal.
1.
Cargo Area Light - Test
NOTE: When doing the cargo area light test, make sure to install the bulb correctly.
1.
Check the light according to the table.
NOTE: Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).
2.
If the result is not as specified, replace the bulb or cargo area light (A).
