Remove the cap (A).

Remove the washer (B).

Disconnect the connector (A).

Remove the rear window wiper motor (B).

Remove the seal (C).

Before reinstalling the wiper arm, connect the rear wiper motor connector, and turn the rear window wiper switch ON, then OFF to return the wiper shaft to the auto-stop position.

NOTE: Check the wiper motor operation.

Align the position marks (A) when installing the seal (B).

NOTE: Inspect the seal for damage. If damaged, replace it.

Install the rear window wiper motor (C).

Connect the connector (D).

Install the washer (A).

Install the cap (B).